Description
Hog Heaven anti-fatigue mats are built to deliver long-lasting comfort and hold up well, even in tough environments.
Hog Heaven Mat | Black
Hog Heaven anti-fatigue mats are built for lasting comfort and durability, even in demanding environments.
- Comfortable – The high-density, nitrile-blended cushion reduces pressure on the lower back and legs for superior comfort.
- Safe – Certified as high-traction by the National Floor Safety Institute (NFSI), with sloped edges that allow a smooth, safe transition from the floor to the mat.
- Durable – The nitrile-blended cushion delivers years of performance. It is molded, rather than glued, to the nitrile rubber surface to prevent separation, and the edges resist cracking or curling.
- Versatile – Suitable for welding; electrically conductive (ESD rating); chemical resistant; surface is grease/oil proof and the cushion is grease/oil resistant.
- Options – Offered in 5/8″ or 7/8″ thicknesses, in solid black or with OSHA-approved caution yellow borders on two sides.
- Customizable – Can be personalized with a logo, message, or design.
Additional information
| Weight | N/A |
|---|---|
| Color | Black |
| Size | 2' x 3', 3' x 5', 3' x 12', 4' x 6', 4.8' x 8' |
| Thickness | 5/8", 7/8" |
Hog Heaven is our most popular anti-fatigue mat. It's ability to perform in a variety of indoor environments (from sensitive to harsh) make it a "go-to" solution for indoor commercial and industrial settings where slag, grease and oil, or chemicals are present.
Hog Heaven mats can be cleaned by scrubbing with a deck brush (when needed), using detergent with a neutral pH, and rinsing with a hose or pressure washer. Mats should be laid flat or hung to dry.
SURFACE
Material: Nitrile rubber
CUSHION
Material: High-density, closed-cell nitrile/PVC-blended foam
OVERALL MAT THICKNESS: 5/8 inch (0.6250" ) or 7/8 inch (0.8750") depending on the product selected
STANDARDS & TESTING
- Durometer: 56
- Compression Deflection:
5/8" Mat: 47.8% at 20 psi, 61.6% at 40 psi
7/8" Mat: 51.0% at 20 psi, 66.0% at 40 psi - Certified high-traction by the National Floor Safety Institute (NFSI)
- Passes flammability standard DOC-FF1-70
- ASTM C1028-96 static coefficient of friction:
Dry 0.87
Wet 0.85 - ESD rating of electrically conductive:
Surface to surface at 50% relative humidity 2.6 x 10^5 ohms
Surface to surface at 12% relative humidity 3.0 x 10^5 ohms - Meets requirements for ASTM/ESD S20.20 and ASTM/ESD S7.1
- Melt point over 500 degrees F; tested at temperatures up to 1800 degrees F for welding/slag resistance (results available upon request)
